Tech Resources

Assembly & Tech Setup Videos

Every Cyberbike arrives mostly assembled. Proper setup ensures the best performance, safety, and ride quality. Most riders complete assembly in 20–45 minutes.

All 2021–2025 Models

Cyberbike Assembly Guide

Follow this step-by-step guide to get your new Cyberbike fully assembled and ready to ride.

Full Assembly Walkthrough — All Models

Complete video guide covering handlebar installation, pedal attachment, seat height, brake and shifter adjustment for all 2021–2025 Cyberbike models.

Follow these steps after unboxing your Cyberbike. Keep your quick-start card handy and watch each video section before performing each step.

Remove all packaging material and inspect the frame, wheels, and components for any shipping damage. Document with photos if anything looks damaged.
Slide the front wheel axle into the fork dropouts. Tighten the thru-axle or quick-release to the specified torque. Check that the rotor aligns with the brake caliper.
Route the stem onto the steerer tube. Align the handlebar level to the front axle. Tighten the stem bolts evenly in a star pattern to 5–6 Nm. Connect the brake and shifter cables if pre-routed.
Pedals are marked L (left) and R (right). The right pedal threads clockwise; the left pedal threads counter-clockwise. Apply a small amount of grease to the threads and tighten to 35 Nm.
Set seat height so your leg is nearly fully extended at the bottom of the pedal stroke. Tighten the seatpost clamp to 5 Nm. Plug in and fully charge the battery before your first ride.
Suspension

Suspension Setup Guides

Proper suspension setup dramatically improves handling, comfort, and control. Select your model below.

Cyclone RX Suspension
Coming Soon
Cyclone RX Suspension Setup — Front & Rear
Wolf Sport Fork · DNM Rear Shock
Raptor Suspension
Coming Soon
Raptor Suspension Setup — Front & Rear
Full-Suspension Setup Guide
PDF Guide
DNM RCP-2S Rear Shock Setup Guide
Download PDF — Official Setup Manual
Drivetrain

Derailleur Adjustment Guides

Keep your shifting crisp and precise with these component-specific adjustment guides.

Coming Soon
LTWOO A7 10-Speed Derailleur Setup
Cable tension, limit screws, indexing
Coming Soon
Shimano Acera 8-Speed Setup
B-gap, limit screws, barrel adjuster
Coming Soon
Going Tubeless — Full Setup Guide
Sealant, tape, valve installation
Dropper Seatpost

Dropper Seatpost Setup & Adjustment

Get the most out of your dropper post with proper cable tension and lever setup.

Coming Soon
Dropper Post Tension Adjustment
Lever feel, cable slack, actuation
Coming Soon
Dropper Seatpost Installation
Cable routing, clamp torque, height
Before You Start

Tools Needed

Gather these tools before beginning assembly. All are available at any hardware or bike shop.

5mm Allen Key
Stem bolts, bottle cage
4mm Allen Key
Brake caliper, clamps
Pedal Wrench (15mm)
Pedal installation
Torque Wrench
Recommended for precision
Floor Pump with Gauge
Tire pressure: 25–35 PSI
Phillips Screwdriver
Display mount, accessories

Still Need Help?

Our USA-based support team is here to walk you through any step of the assembly process.

Contact Support (855) 274-6564 Download Manuals